Radioactive nanosized colloids and indocyanine green identify the same sentinel lymph nodes in oral squamous cell carcinoma.

PURPOSE: Near-infrared fluorescence imaging using indocyanine green (ICG) combined with radioactive markers has the potential to improve sentinel lymph-node (SLN) mapping in oral squamous cell carcinoma (OSCC). This study aimed to evaluate the ability of 99mTc and ICG in identifying the sentinel lymph nodes in patients with early stage OSCC. METHODS: Data were collected prospectively, and a retrospective analysis of 15 patients with early stage OSCC and a cN0 neck was performed. All patients received peritumoral injection of 99mTc the day before surgery and ICG was administered intraoperatively. Intentionally, the application of the two different tracers were done by two different physicians with varying degrees of experience. The number of identified lymph nodes positive for 99mTc and ICG, the overlap or possible discrepancies of both methods, and the time until fluorescence signals of ICG were detected were noted. RESULTS: In all patients, a 100% agreement in sentinel lymph-node identification was achieved, regardless of both the exact location of the peritumoral injection and the experience of the injecting surgeon. Time until ICG accumulation in the sentinel lymph node was consistently found to be between 1 and 3 min. CONCLUSION: ICG constitutes a viable and useful addition to 99mTc for intraoperative sentinel lymph-node detection in this study.

Clinical, Radiological, and Pathological Diagnosis of Fibro-Osseous Lesions of the Oral and Maxillofacial Region: A Retrospective Study.

BACKGROUND: Fibro-osseous lesions (FOL) of the jaw represent a rare, benign group of lesions that share similar clinical, radiological, and histopathological features and are characterized by progressive, variable replacement of healthy bone tissue by fibrous connective tissue. METHODS: This retrospective study aimed to evaluate the incidence of fibro-osseous lesions and to reassess the efficacy of case-specific treatment management from a clinical, radiological, and histopathological perspective based on 14 years of data. RESULTS: Forty-four patients with a radiological and/or histopathological diagnosis of benign FOLs were identified and re-evaluated. Cemento-osseous dysplasia was the most common group of FOLs present in our patient cohort (45%), followed by ossifying fibroma (39%) and fibrous dysplasia (16%). The diagnostic imaging technique of choice was CBCT (68%), followed by PAN (18%), with most patients (95 %) additionally undergoing biopsy. The mean age of the patients at the time of diagnosis was 40.54 ± 13.7 years, with most lesions being located in the mandible (86%), with females being predominantly affected (73%). CONCLUSION: An interdisciplinary approach that analyzes all case-specific factors, including demographic data, medical history, intraoperative findings, and, most importantly, histopathological and radiological features, is essential for an accurate diagnosis and key to avoiding inappropriate treatment.

Does Zygomatic Complex Symmetry Differ Between Healthy Individuals and Surgically Treated Patients Using Intraoperative 3-Dimensional Cone Beam Computed Tomographic Imaging?

PURPOSE: Reconstruction of symmetry after zygomaticomaxillary complex (ZMC) fractures is essential for esthetic appearance as well as function. Therefore, this study aimed to analyze whether bony facial symmetry in patients surgically treated for unilateral ZMC fractures via intraoperative imaging differs from that of healthy individuals. PATIENTS AND METHODS: Retrospective and cross-sectional radiographic measurements of patients treated for unilateral ZMC fractures via intraoperative cone beam computed tomography (CBCT) were performed to evaluate the postoperative ZMC symmetry. The same number of healthy individuals without any history of midfacial trauma matched for age and gender served as the control group. Asymmetry of the ZMC was determined by measuring bilateral differences in the malar eminence position on CBCT. In addition, demographic statistics, etiology, and fracture type were analyzed. RESULTS: Analysis of 57 surgically treated patients and 57 healthy individuals with a mean age of 29 years was performed. No significant difference in the symmetry of the malar eminence position was observed between healthy individuals and patients treated for a unilateral ZMC fracture (P = .890). In one third of patients, corrections were needed after intraoperative CBCT control. CONCLUSIONS: The results of this study indicate that, on average, a ZMC asymmetry of 1.6 mm is observed in healthy individuals. Furthermore, the use of intraoperative CBCT for the treatment of dislocated ZMC fractures helps to achieve precise anatomic, symmetrical repositioning and is suggested to improve the quality of care.

Improved Results in Closed Reduction of Zygomatic Arch Fractures by the Use of Intraoperative Cone-Beam Computed Tomography Imaging.

PURPOSE: The use of intraoperative imaging could help overcome the insufficiency of closed reduction that can result from the absence of visible feedback to evaluate the accuracy of the reduction in isolated zygomatic arch fractures. The aim of the present study was to evaluate the use of intraoperative 3-dimensional cone-beam computed tomography (CBCT) to improve the accuracy of reduction, by measuring the remaining cortical step and dislocation angle. We also evaluated the effect of CBCT on the need for repeat surgery. PATIENTS AND METHODS: We performed a retrospective cohort study of patients who had undergone zygomatic arch reduction surgery from January 2008 to May 2018. The patients were grouped according to the predictor variables into group A (postoperative radiologic follow-up studies) and group B (intraoperative CBCT imaging studies). The primary outcome variables were the remaining cortical step and dislocation angle compared with the ideal virtually mirrored position. These were assessed as measures of reduction accuracy. The secondary variables included age, gender, surgery duration, and fracture type. Statistical analysis was performed using a robust multiple regression analysis. RESULTS: The 45 patients were divided into 2 subgroups with 18 patients in the no intraoperative imaging (control) group and 27 patients in the intraoperative imaging group. Insufficient reduction occurred in 1 patient in the group without intraoperative imaging, leading to repeat surgery. No repeat surgery was necessary in the intraoperative imaging group. The remaining cortical step of the intraoperative imaging group was significantly lower than that of the control group (0.18 vs 2.03 mm; P < .001). For the remaining dislocation angle, similar findings were observed but without statistical significance (3.93° vs 7.75°; P = .58). CONCLUSIONS: The use of intraoperative CBCT significantly increased the accuracy of the reduction. Furthermore, the need for repeat surgery was not required for any patient in the intraoperative imaging group with CBCT-guided reduction.

Use of amniotic membrane for radial forearm free flap donor site coverage: clinical, functional and cosmetic outcomes.

OBJECTIVE: To evaluate the clinical, functional and aesthetic outcomes for radial forearm free flap (RFFF) donor sites covered with amniotic membrane (AM). MATERIAL AND METHODS: The healing process of patients with RFFF donor sites covered with AM was prospectively followed for 1 year. Additionally at the 12-month evaluation, objective scoring systems were used to assess the aesthetic (Vancouver scar scale, VSS: range 1-13) and functional outcome (skin sensibility, hand/wrist functionality [goniometer], grip strength [score 1 = excellent, 5 = poor]). By using a subjective rating system (score 1 = excellent, 5 = poor), the patient-reported aesthetic and functionality outcome was correlated with objective data analysis. RESULTS: Twenty-one out of 23 patients were followed for 12 months (dropout: 2 patients at 3 months). In 17/23 (73.9%) patients RFFF defect covered with AM showed an uneventful healing period (< 3 months). Prolonged healing periods (> 3 months < 6) for 6 patients (26.1%) were attributed to wound infections (4×), seroma (1×) and inflammation (1×). At the 1-year evaluation, there was a significant (p < 0.01) correlation between subjective (2.0 ± 0.71) and objective aesthetic scores (VVS 3.74 ± 2.18), and a successful grip strength (score 1.67 ± 0.86); however, thumb hyposensibility in 76.2% was seen. A high body mass index (BMI) was in conjunction with a negative (p = 0.012) and the use of antihypertensive medications provided positive effects (p = 0.041) on the aesthetic outcome. CONCLUSION: RFFF donor site defects covered using AM show excellent clinical, aesthetic and functional outcome representing patient comorbidities (BMI, antihypertensive drugs) might affect the aesthetic outcome. CLINICAL RELEVANCE: In relation to the excellent outcomes found, the use of AM offers an alternative treatment procedure for RFFF defect covering.

Machine learning based prediction of perioperative blood loss in orthognathic surgery.

The aim of this study was to evaluate, if and with what accuracy perioperative blood loss can be calculated by a machine learning algorithm prior to orthognathic surgery. The investigators implemented a random forest algorithm to predict perioperative blood loss. 1472 patients who underwent orthognathic surgery from 01/2006 to 06/2017 at our institution were screened and 950 patients were included and separated 80%/20% in a training set - utilized to generate the prediction model - and a testing set - utilized to estimate the accuracy of the model. The outcome variable was the correlation between actual perioperative blood loss and predicted perioperative blood loss in the testing set. Other study variables were the difference of actual and predicted perioperative blood loss and important factors influencing perioperative blood loss using random forest feature importance. Descriptive and bivariate statistics were computed and the P value was set at 0.05. There was a statistically significant correlation between actual perioperative blood loss and predicted perioperative blood loss (p < 0.001). The mean difference was 7.4 ml with a standard deviation of 172.3 ml. The results of this study suggest that the application of a machine-learning algorithm allows a prediction of perioperative blood loss prior to orthognathic surgery.

Influence of Implant Length and Associated Parameters Upon Biomechanical Forces in Finite Element Analyses: A Systematic Review.

PURPOSE: The aim of this systematic review is to provide an overview of finite element analyses comparing standard and short dental implants concerning biomechanical properties and to detect the most relevant parameters affecting periimplant stress concentrations. MATERIAL AND METHODS: After screening the literature and assessment of studies, 36 studies were included in this review. RESULTS: Eighty-three percent of the studies state that short dental implants have to bear higher stress concentrations compared with standard length implants. At the same time, 44% of articles note that implant diameter can be considered a more effective design parameter than implant length to reduce stress concentrations and to avoid an overload of periimplant bone. Regardless of implant dimension, in all studies, the highest stress concentrations are found in the cortical section around the upper part of the implant. CONCLUSIONS: Unaffected of bone quality, implant diameter is found to play a key role to minimize periimplant stress concentrations. Concerning stress reduction implant length gains increasing relevance with decreasing bone density. Furthermore, splinting of short implants constitute an appropriate tool to avoid crestal overloading.

Single tooth implants in the esthetic zone following a two-stage all flapless approach: A retrospective analysis.

BACKGROUND: Due to chronic inflammation or trauma facial bone is frequently missing after tooth loss in the esthetic zone. As a consequence, procedures to augment or at least to preserve bone are frequently necessary prior to implant placement. PURPOSE: The aim of this retrospective case series is to demonstrate the applicability of a staged all-flapless concept to establish satisfactory implant restorations following situations of partial missing facial bone in the esthetic zone. MATERIALS AND METHODS: Radiological/clinical data of 25 patients were analyzed and an esthetic evaluation of 24 patients was performed. The staged concept included ridge preservation at time of tooth extraction and delayed guided implant placement. Marginal bone loss was measured radiologically and esthetic evaluation was performed based on standardized photographs using the Pink Esthetic Score as well as the Papilla Index. RESULTS: Implant success rate revealed 100%. The mean radiological peri-implant marginal bone loss measured 1.16 mm (SD: 0.16). Regarding the esthetic outcome 71% of patients were evaluated with a Pink Esthetic Score higher or equal to 10 constituting satisfactory esthetics (median pink esthetic score: 10). The mean follow-up time for clinical and radiographic analysis was 1.3 years (SD: 0.6 years) and 1.2 years (SD: 0.6) for esthetic evaluation. CONCLUSION: Although marginal bone loss cannot be avoided, the staged concept of flapless ridge preservation and subsequent delayed flapless guided implant placement carries the potential to improve esthetics of single-tooth implants in the anterior maxilla.

Biomechanical testing of zirconium dioxide osteosynthesis system for Le Fort I advancement osteotomy fixation.

The following work is the first evaluating the applicability of 3D printed zirconium dioxide ceramic miniplates and screws to stabilize maxillary segments following a Le-Fort I advancement surgery. Conventionally used titanium and individual fabricated zirconium dioxide miniplates were biomechanically tested and compared under an occlusal load of 120N and 500N using 3D finite element analysis. The overall model consisted of 295,477 elements. Under an occlusal load of 500N a safety factor before plastic deformation respectively crack of 2.13 for zirconium dioxide and 4.51 for titanium miniplates has been calculated. From a biomechanical point of view 3D printed ZrO2 mini-plates and screws are suggested to constitute an appropriate patient specific and metal-free solution for maxillary stabilization after Le Fort I osteotomy.

The influence of crown-to-implant ratio on marginal bone levels around splinted short dental implants: A radiological and clincial short term analysis.

BACKGROUND: The amount of marginal bone resorption around dental implants is considered to have a significant impact on implant stability as well as implant survival rates. PURPOSE: The aim of this prospective study was to investigate the influence of prosthetic as well as patient specific factors on marginal bone loss around short dental implants. MATERIALS AND METHODS: Seventy-six implants, which supported splinted crowns were included for investigation. All implants were from the same type and had an intraosseous length of 6.5 mm and a diameter of 4.0 mm. Twenty implants were additionally splinted onto longer ones. Measurements of marginal bone loss were performed at a mean of 12.38 months after prosthetic loading and the mean follow-up for clinical evaluation was 20.52 months. RESULTS: Overall two implant failures were recorded, revealing a survival rate of 97.3%. Marginal bone resorption around 72 short implants measured 0.71 mm (SD: 0.74 mm) and was found to have a strong correlation with calculated Crown-to-Implant ratio (r = .71; P < .001). Age, gender, insertion torque, implant surface area, location, position, bone quality, and insertion torque did not influence peri-implant bone loss after one year of loading. CONCLUSION: Within the limitations of the study, it is suggested that Crown-to-Implant ratios should not exceed 1.7 to avoid increased early marginal bone loss.

Denture-Related Biomechanical Factors for Fixed Partial Dentures Retained on Short Dental Implants.

Prosthodontically driven biomechanical considerations are essential for longterm successful outcomes in dental implant therapy. Correct protocols seek to preclude potential consequences associated with functional and parafunctional occlusal overload such as screw loosening, component fracture, compromised marginal bone maintenance, and the integrity of the induced osseointegration response. Other concerns also need to be addressed, more especially when other implants are selected, for example: bridge insertion torque (BIT) in cases of immediate loading, cantilever length-anteroposterior spread ratio (CL-AP), overall crown-to-implant ratio (oCIR), total bone-to-implant surface area (tBICA), and the status of the opposing dentition. In spite of promising clinical results, evidence-based clinical protocols demand that such biomechanical limits still need to be determined.

Identification of functionally distinct Na-HCO3 co-transporters in colon.

Na-HCO3 cotransport (NBC) regulates intracellular pH (pHi) and HCO3 secretion in rat colon. NBC has been characterized as a 5,5'-diisothiocyanato-2-2'-stilbene (DIDS)-sensitive transporter in several tissues, while the colonic NBC is sensitive to both amiloride and DIDS. In addition, the colonic NBC has been identified as critical for pHi regulation as it is activated by intravesicular acid pH. Molecular studies have identified several characteristically distinct NBC isoforms [i.e. electrogenic (NBCe) and electroneutral (NBCn)] that exhibit tissue specific expression. This study was initiated to establish the molecular identity and specific function of NBC isoforms in rat colon. Northern blot and reverse transcriptase PCR (RT-PCR) analyses revealed that electrogenic NBCe1B or NBCe1C (NBCe1B/C) isoform is predominantly expressed in proximal colon, while electroneutral NBCn1C or NBCn1D (NBCn1C/D) is expressed in both proximal and distal colon. Functional analyses revealed that amiloride-insensitive, electrogenic, pH gradient-dependent NBC activity is present only in basolateral membranes of proximal colon. In contrast, amiloride-sensitive, electroneutral, [H(+)]-dependent NBC activity is present in both proximal and distal colon. Both electrogenic and electroneutral NBC activities are saturable processes with an apparent Km for Na of 7.3 and 4.3 mM, respectively; and are DIDS-sensitive with apparent Ki of 8.9 and 263.8 µM, respectively. In addition to Na-H exchanger isoform-1 (NHE1), pHi acidification is regulated by a HCO3-dependent mechanism that is HOE694-insensitive in colonic crypt glands. We conclude from these data that electroneutral, amiloride-sensitive NBC is encoded by NBCn1C/D and is present in both proximal and distal colon, while NBCe1B/C encodes electrogenic, amiloride-insensitive Na-HCO3 cotransport in proximal colon. We also conclude that NBCn1C/D regulates HCO3-dependent HOE694-insensitive Na-HCO3 cotransport and plays a critical role in pHi regulation in colonic epithelial cells.

CASE REPORT Temporomandibular Joint Arthroplasty With Human Amniotic Membrane: A Case Report.

This case reports the usage of human amniotic membrane combined with a costochondral graft as an interpositional material in temporomandibular joint reconstruction for the first time in humans. Because of the favorable outcome 20 months postoperatively, it has to be considered as an approach bringing to light the antiadhesive potential of amniotic membrane. This case report must be regarded as initial spadework and should motivate other institutions to intensify their clinical research in this field. Because of the fact that currently used interpositional materials do not prevent the recurrence of temporomandibular joint ankylosis sufficiently, it is of great interest to establish a proper therapeutic intervention fulfilling these demands. Furthermore, the demonstrated antiadhesive properties of amniotic membrane highlight its multifaceted field of application. Nevertheless, further studies have to prove the findings reported in our case.